This is part 4 of our series covering aftermarket parts for your 1/25 Revell classic Bronco model build.
A detailed engine compartment separates the skilled model builders from the rest
Replicas and Miniatures Company of Maryland offers these "Power by Ford" valve covers especially for the Revell Bronco kit
Calnaga Castings is offering these M/T finned valve covers for the small block Ford
Calnaga also offers Holley 650 double pumper carbs
Fireball Model Works has you covered in the carb department; they have 'em all
Carter AFB
If building a tribute and you need long tube headers, VCG Resins by Reese has some that might work for you
Pro Tech has the parts to make these carbs look realistic
throttle linkage kits
Rubber fuel line:
Then there is the spark plug wires and boots
Don't forget the wire looms
For adding a second battery you could use one of these gel celled units from Calnaga
Another Optima option, this one from VCG Resins by Reese
Parts by Parks offers this kit with radiator hoses, heater hoses and battery cables
While not part of the engine, they usually are attached, is the transmission. The Revell kit comes with a 3-speed manual transmission, which was the most common transmission in classic Broncos, but if you want to build a tribute and need a C-4 automatic, VCG Resins has got what you need
You could decide to go modern and install this Coyote V-8 in your Bronco, I found this on ebay
No comments:
Post a Comment